Linux version 2.2.14 (root@turandot) (gcc version 2.95.1 19990816/Linux (release)) #1 Sat Apr 8 01:39:30 CEST 2000
Detected 350804106 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 349.80 BogoMIPS
Memory: 60212k/65536k available (940k kernel code, 416k reserved, 836k data, 60k init, 3072k badram)
Dentry hash table entries: 8192 (order 4, 64k)
Buffer cache hash table entries: 65536 (order 6, 256k)
Page cache hash table entries: 16384 (order 4, 64k)
CPU: Intel Pentium II (Deschutes) stepping 02
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au)
PCI: PCI BIOS revision 2.10 entry at 0xfb230
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
TCP: Hash tables configured (ehash 65536 bhash 65536)
Initializing RT netlink socket
Starting kswapd v 1.5 
parport0: PC-style at 0x378 (0x778) [SPP,ECP,ECPEPP,ECPPS2]
parport0: detected irq 7; use procfs to enable interrupt-driven operation.
Detected PS/2 Mouse Port.
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
ttyS03 at 0x02e8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
lp0: using parport0 (polling).
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.9)
Real Time Clock Driver v1.09
js: Joystick driver v1.2.15 (c) 1999 Vojtech Pavlik <vojtech@suse.cz>
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
hda: IBM-DJNA-371350, ATA DISK drive
hdc: FX400E, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: IBM-DJNA-371350, 12949MB w/1966kB Cache, CHS=1650/255/63
hdc: ATAPI 4X CD-ROM drive, 128kB Cache
Uniform CDROM driver Revision: 2.56
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
sym53c8xx: at PCI bus 0, device 17, function 0
sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up)
sym53c8xx: 53c810a detected 
sym53c810a-0: rev=0x12, base=0xe8001000, io_port=0xe800, irq=11
sym53c810a-0: ID 7, Fast-10, Parity Checking
sym53c810a-0: restart (scsi reset).
scsi0 : sym53c8xx - version 1.3g
scsi : 1 host.
  Vendor: RICOH     Model: MP6200S           Rev: 2.03
  Type:   CD-ROM                             ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
  Vendor: QUANTUM   Model: LIGHTNING 730S    Rev: 241E
  Type:   Direct-Access                      ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 4, lun 0
  Vendor: SCANNER   Model:                   Rev: 1.01
  Type:   Scanner                            ANSI SCSI revision: 01 CCS
Detected scsi generic sgc at scsi0, channel 0, id 6, lun 0
scsi : detected 1 SCSI cdrom 1 SCSI disk total.
sym53c810a-0-<0,*>: target did not report SYNC.
sr0: scsi3-mmc drive: 6x/6x writer cd/rw xa/form2 cdda tray
sym53c810a-0-<4,*>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 8)
SCSI device sda: hdwr sector= 512 bytes. Sectors= 1431760 [699 MB] [0.7 GB]
3c59x.c:v0.99H 11/17/98 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/vortex.html
eth0: 3Com 3Com Boomerang (unknown version) at 0xe400,  00:50:04:3f:0f:d0, IRQ 11
  8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface.
  MII transceiver found at address 24, status 182d.
  Enabling bus-master transmits and whole-frame receives.
Partition check:
 sda: unknown partition table
 hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 hda9 > hda4
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 60k freed
Adding Swap: 409648k swap-space (priority -1)
es1371: version v0.19 time 10:09:34 Mar 25 2000
es1371: found adapter at io 0xec00 irq 11
es1371: features: joystick 0x0
es1371: codec vendor CRY revision 19
es1371: codec features Headphone out 20bit DAC 18bit ADC
es1371: stereo enhancement: Crystal Semiconductor 3D Stereo Enhancement
lat_udp forgot to set AF_INET in udp sendmsg. Fix it!